Cospec Innolab

2012~Present

Cospec Innolab, an innovative creator of intelligent BIM solutions

• 2024
  • Outsourcing of the BIM Consignment Project of Gadeokdo New Airport Construction (Korea Airports Corporation)
• 2021
  • Development of an evacuation simulation program for fire safety managers
    (Ministry of Science and ICT / National Fire Agency)
  • Development of the integrated system for airport facility information
    management (KAC-BIM) - Stage 2 (Korea Airports Corporation)
  • Development of Artificial Intelligence-based Architectural Design Automation
    (National Institute of Transportation, Science and Technology)
• 2020
  • Framework development for the Integrated management system of
    airport facilities information (KAC-BIM) (Korea Airports Corporation)
• 2018
  • Development of Next DVM-Pro for system A/C selection
    (Samsung Electronics)
• 2017
  • Development of automation support technology for openBIM-based
    architectural design and of advanced maintenance technology
    (Korea Agency for Infrastructure Technology Advancement)
  • Development of the iGrant: Automated Regulation Code Check System
    (Singapore BCA)
• 2016
  • Construction and maintenance of the site drawing/document
    management system (Hyundai E&C)
  • Constructiom of the BIM-based system for quantity calculation (Daelim)
  • Introduction and Qualification of the KBim Collaboration system
    (Haeahn Architecture)
• 2015
  • Construction and maintenance of the design information DB system
    (Changjo Architecture)
  • Development of the architectural eco-friendly design support system
    (Sangsang Jinhwa)
  • Development of the drawing management system (Sangsang Jinhwa)
• 2014
  • Development and maintenance of the Kolumbus S/W system for the
    Technology Information Center (Korea Engineering Consultants Corp.)
  • Development of the drawing management system (Pulmuone)
  • Development of post-processing S/W for the Lateral Displacement
    Review Algorithm (Hyundai E&C)
  • Development of a tool for green building envelope optimum design
    (Hyundai E&C)
  • Development of the system for tunnel risk assessment
    (Sungkyunkwan University)
• 2013
  • Development of an HDC drawing management system
    (Hyundai Architects and Engineers Assoc.) 
  • Maintenance and development of the Design Information Integrated
    Management System (AURIM) (Heerim Architects & Planners
  • Development of the Construction Data Management Program
    (Gwangju Institute of Science and Technology)
  • Development and maintenance of the DVM-Pro S/W for system A/C
    selection (Samsung Electronics) 
  • Development, update and maintenance of the “BlueCAD” CAD system
    for security drawing design (ADT CAPS)
  • Development and maintenance of the VRF Select System (Trane®, USA)
  • Construction of openBIM-based building design standards and
    infrastructure (Korea Agency for Infrastructure Technology Advancement)
  • Construction of openBIM technology environment for building design
    quality innovation (Korea Agency for Infrastructure Technology Advancement) (국토교통과학기술진흥원)
  • Development of am algorithm-based SMART architectural design S/W
    (DASBIM)
  • Development of the design system Ver.2.0 using a parametric tool
    (Samsung C&T)
  • Construction of the Structure Foundation Stability Assessment Program
    (FAP) (Samsung C&T)
  • Improvement of the drawing management system (Kookmin Bank)
  • HDC CAD upgrade for Hyundai Architects and Engineers Assoc.

Patents

• 2024
  • [No. 10-2024-0177397] Method and System for Quantifying Design Based on Image and Text Information of Building Facades
  • [No. 10-2725444] Control Method and Device Based on Transparent Display
  • [No. 10-2024-0159286] Automated Evaluation System for Certification of BIM-Based Design with Automatic Upgrade Type
  • [No. 10-2024-0145041] Method for Automatically Generating Parapets in BIM Models
  • [No. 10-2024-0123810] Trust-Based Security Culture Model, Diagnostic Tool for Security Culture, and Diagnostic Method Using the Same
  • [No. 10-2024-0121392] Major Structural Component Identification System for RC Structures and Attribute-Information-Based BIM Model Enhancement System Using the Same
  • [No. 10-2683056] Traffic Management Method and Device at Airports
  • [No. 10-2670333] Integrated Management Method and Device for Facilities Using Digital Twin
  • [No. 10-2024-0024197] Artificial Intelligence-Based BIM Model Enhancement System Using Attribute Information and Method for AI-Based BIM Model Enhancement
• 2023
  • [No. 10-2023-0189340] System and Method for Generating Completion Perspective Images Using Building Mass Images and Text in Early Design Stages
  • [No. 10-2023-0172225] BIM Model Enhancement System Using Attribute Information and Method for BIM Model Enhancement
  • [No. 10-2023-0165414] BIM Model Management System and Method for Managing BIM Models Using the Same
• 2021
  • [No. 10-2260969] Apparatus and method for object type information recognition of architectural information model using deep learning algorithm
• 2020
  • [No. 10-2112749] Management method and program for construction tower cranes using integrated schedule planning and computer readable recording medium
  • [No. 10-2112748] Management method and program for earthwork volume and frame volume for construction using integrated schedule planning and computer readable recording medium
  • [No. 10-2112747] Method and program for planning integrated schedule of construction projects using vertical and horizontal relationships and

Registered Programs

• 2024
  • [No. C-2024-051919] Natural Language-Based Automatic Quality Review Module Using LLM
  • [No. C-2024-050120] 3D Design Requirement Data Automatic Review Module
  • [No. C-2024-043345] Architectural Design Automation Platform
  • [No. C-2024-043344] Pilot Module for Design Certification Evaluation Non-Conformance Review
  • [No. C-2024-043343] Integrated Evaluation Automation System for Design Certification
  • [No. C-2024-043342] Design Conformance Evaluation Automation System
  • [No. C-2024-043341] BIM Model Automatic Enhancement Module
  • [No. C-2024-043340] Architectural Design Optimal Alternative Generation Program
  • [No. C-2024-043339] Land Condition-Based Mass Automatic Generation Module
  • [No. C-2024-043238] Inno-PMIS
  • [No. C-2024-043237] KIDT-PM Const
  • [No. C-2024-043236] KIDT-PM Plan
  • [No. C-2024-007184] KIDT-CDE History
  • [No. C-2024-007183] KIDT-CDE Checker
  • [No. C-2024-007182] KIDT-Aero Safety
  • [No. C-2024-007181] KIDT-FM M&O
  • [No. C-2024-007180] KIDT-CDE IDM
  • [No. C-2024-007179] KIDT-CDE API
  • [No. C-2024-007178] KIDT-CDE Board
• 2023
  • [No. C-2023-061541] Evacuation Simulation Execution Module
  • [No. C-2023-061540] Fire-Evacuation Model Coupling Module
  • [No. C-2023-061539] Fire Phenomenon Model Utilization Module
  • [No. C-2023-061538] Timeframe-Based Object Visualization Module
  • [No. C-2023-061537] BIM Model Modification/Management Module for Simulations
  • [No. C-2023-054201] Interface Module for Design Certification Evaluation
  • [No. C-2023-054200] AI Training Model Integration Test Module for Design Certification Evaluation
  • [No. C-2023-054199] Pilot Module for Non-Conformance Determination in Design Certification Evaluation
  • [No. C-2023-054198] Rule Integration Module for Design Certification Evaluation
  • [No. C-2023-049755] Pilot Module for Integrated Design Automation Service
  • [No. C-2023-038195] KIDT-Aero
  • [No. C-2023-038194] KIDT-FM
  • [No. C-2023-038193] KIDT-CDE
• 2022
  • [No. C-2022-052451] AIBIM-Detailer - Automatic Detailing Module for Bathroom Tile Walls and Floors
  • [No. C-2022-052452] AIBIM-Detailer - Automatic Generation Module for Vehicle Ramps and Curbs
  • [No. C-2022-050854] AIBIM-Detailer - Automatic Generation Module for Curtain Boxes
  • [No. C-2022-049721] AIBIM-Detailer - Automatic Generation Module for Stair Finishes
  • [No. C-2022-044784] AIBIM-Detailer - Automatic Detailing Module for Doors
  • [No. C-2022-040097] AIBIM-Detailer - Automatic Room-Specific Finish Type Generation Module for Floors, Walls, and Ceilings
  • [No. C-2022-040096] AIBIM-Detailer - Automatic Finish Type Generation Module for Floors, Walls, and Ceilings
  • [No. C-2022-045268] Module for Linking Design Certification Evaluation Rules
  • [No. C-2022-045267] System for Automated Evalutation of Design Suitability
  • [No. C-2022-044198] Architectural Scope and Mass Generation Module
  • [No. C-2022-052170] Module for Simulation Settings Management
  • [No. C-2022-052169] Module for Agent Response/Behavior Model
  • [No. C-2022-052168] Support Module for Latest Version of the IFC International Standard for BIM
• 2021
  • [No. C-2021-027800] xPPM-NEO
  • [No. C-2021-048778] Piolt Module for Intelligent Design Legality Assessment
  • [No. C-2021-048779] Module for Linking Design Certification Evaluation Rules
  • [No. C-2021-048537] Architectural Scope and Mass Generation Module
  • [No. C-2021-034548] Web-based Visualization Module for OpenBIM Design
  • [No. C-2021-034547] Module for Automated Code Compliance Checking
  • [No. C-2021-034284] Pilot Software for Interconnection between BIM Data Specifications
  • [No. C-2021-034283] Pilot Support Software for Technical Review of Design Components
  • [No. C-2021-034549] Software for Automated Object Segmentation in Design Model
  • [No. C-2021-034285] Space Program Pilot Software
• 2020
  • [No. C-2020-038884] Trial support software for technical review of design elements - space-based automatic generation of doors
  • [No. C-2020-038883] Trial software for interlinkage of BIM data specifications
  • [No. C-2020-038882] Software for automated seapration of design model objects
  • [No. C-2020-038881] Trial support software for technical review of design elements - automated creation of structural pseudo-ections
  • [No. C-2020-038620] Visualization system for BIM design data
• 2019
  • [No. C-2019-030335] Automatic generation system for design alternatives
  • [No. C-2019-030334] Statistical visualization system for BIM design data
  • [No. C-2019-030333] BIM-based design integrated IRR review software
  • [No. C-2019-030160] Preliminary estimation software
  • [No. C-2019-030159] Software for window and door schedule linkage
  • [No. C-2019-030158] Trial support software for design condition review
  • [No. C-2019-030161] Software for construction cost estimation (structural sector)
• 2018
  • [No. C-2018-028044] Visual information extraction module for each BIM object
  • [No. C-2018-028045] Preliminary estimate based ROI, IRR analysis module
  • [No. C-2018-027960] Space program-based interior alternative review of finishing materials
  • [No. C-2018-027961] Preliminary estimation software
• 2017
  • [No. C-2017-015834] BIM Station
• 2016
  • [No. C-2016-027992] BIM information standard data dissemination and operation management system
  • [No. C-2016-026078] KBim library content portal
  • [No. C-2016-024683] KBim D-Generator v1.0
  • [No. C-2016-024682] Preliminary estimation program (KBim EST-P) v0.91
  • [No. C-2016-024681] Structural calculation sheet linkage program (KBim STR-L Revit) v0.91
  • [No. C-2016-024680] Kbim Submission v1.0
• 2015
  • [No. C-2015-012338] OpenBIM construction cost linking module
  • [No. C-2015-012337] KBIMS portal
  • [No. C-2015-012336] BIM library supply management system
  • [No. C-2015-012335] Combination system for BIM classification system scenarios
  • [No. C-2015-010831] KBim Submission
  • [No. C-2015-010830] Kbim Qty
  • [No. C-2015-010685] Kbim DGenerator-Struct
  • [No. C-2015-010684] Kbim DGenerator
• 2014
  • [No. C-2014-024225] BIM library management module
  • [No. C-2014-024224] BIM information standard framework introduction system
  • [No. C-2014-021924] IFC-based license information extraction program
  • [No. C-2014-021923] Program for column schedule creation
  • [No. C-2014-021922] Structural calculation sheet linkage program for Revit